ADAS Subroutine e9spln
C SUBROUTINE E9SPLN( NEDIM , & IEA , IEVAL , & TEEA , EEVA , & SCX , SCXA , & LERNG & ) C----------------------------------------------------------------------- C C ****************** FORTRAN77 SUBROUTINE: E9SPLN ********************* C C PURPOSE: C PERFORMS CUBIC SPLINE ON LOG(ENERGY <EV/AMU> ) VERSUS C LOG(CX CROSS-SECTION <CM2>). C INPUT DATA FOR A GIVEN DONOR/RECEIVER COMBINATION DATA-BLOCK. C C USING ONE-WAY SPLINES IT CALCULATES THE CROSS-SECTIONS C FOR 'IEVAL' COLLISION ENERGIES VALUES FROM C THE LIST OF COLLISION ENERGIES READ IN FROM THE INPUT FILE C C IF A VALUE CANNOT BE INTERPOLATED USING SPLINES IT IS C EXTRAPOLATED VIA 'XXSPLE'. (SEE NOTES BELOW). C C CALLING PROGRAM: ADAS509/SSCX C C C SUBROUTINE: C C INPUT : (I*4) IEA = INPUT DATA FILE: NUMBER OF COLLISION ENER- C GIES READ FOR THE DATA-BLOCK BEING ASSESSED C INPUT : (I*4) IEVAL = NUMBER OF ISPF ENTERED COLLISION ENERGIES C VALUES FOR WHICH CX CROSS-SECTIONS C ARE REQUIRED FOR TABULAR/GRAPHICAL OUTPUT. C C INPUT : (R*8) TEEA() = INPUT DATA FILE: COLLISION ENERGIES (EV/AMU) C FOR THE DATA-BLOCK BEING ASSESSED. C DIMENSION: COLLISION ENERGY INDEX C INPUT : (R*8) EEVA() = USER ENTERED: COLLISION ENERGIES (EV/AMU) C DIMENSION: COLLISION ENERGY INDEX C C INPUT : (R*8) SCX() =INPUT DATA FILE: FULL SET OF CX CROSS- C SECTIONS FOR THE DATA-BLOCK BEING ANALYSED C 1ST DIMENSION: COLLISION ENERGY INDEX C OUTPUT: (R*8) SCXA() = SPLINE INTERPOLATED OR EXTRAPOLATED C CX CROSS-SECTIONS FOR C THE USER ENTERED COLLISION ENERGIES. C DIMENSION: COLLISION ENERGIES INDEX C C OUTPUT: (L*4) LERNG()= .TRUE. => OUTPUT 'SCXA()' VALUE WAS INTER- C POLATED FOR THE USER ENTERED C COLLISION ENERGY 'EEVA()'. C .FALSE. => OUTPUT 'SCXA()' VALUE WAS EXTRA- C POLATED FOR THE USER ENTERED C COLLISION ENERGY 'EEVA()'. C DIMENSION: COLLISION ENERGY INDEX C C (I*4) NIN = PARAMETER = MAX. NO. OF INPUT ENERGY C VALUES. MUST BE >= 'IEA' C (I*4) NOUT = PARAMETER = MAX. NO. OF OUTPUT ENERGY C VALUES. MUST BE >= 'IEVAL' C (I*4) L1 = PARAMETER = 1 C C C (I*4) IET = ARRAY SUBSCRIPT USED INPUT FILE COLLISION C ENERGIES. C (I*4) IT = ARRAY SUBSCRIPT USED FOR USER ENTERED C COLLISION ENERGIES. C (I*4) IOPT = DEFINES THE BOUNDARY DERIVATIVES FOR THE C SPLINE ROUTINE 'XXSPLE', SEE 'XXSPLE'. C (VALID VALUES = <0, 0, 1, 2, 3, 4) C C (L*4) LSETX = .TRUE. => SET UP SPLINE PARAMETERS RELATING C TO 'XIN' AXIS. C .FALSE. => DO NOT SET UP SPLINE PARAMETERS C RELATING TO 'XIN' AXIS. C (I.E. THEY WERE SET IN A PREVIOUS C CALL ) C (VALUE SET TO .FALSE. BY 'XXSPLE') C C (R*8) R8FUN1 = FUNCTION - (SEE ROUTINES SECTION BELOW) C C (R*8) XIN() = LOG( DATA FILE COLLISION ENERGIES ) C (R*8) YIN() = LOG( DATA FILE CX CROSS-SECTIONS) C (R*8) XOUT() = LOG( USER ENTERED COLLISION ENERGIES.) C (R*8) YOUT() = LOG( OUTPUT GENERATED CX CROSS-SECTIONS) C (R*8) DF() = SPLINE INTERPOLATED DERIVATIVES C C C NOTE: C C ONE-DIMENSIONAL SPLINE CARRIED OUT BY THIS SUBROUTINE: C C LOG( SCX ) vs. LOG( E ) C C E = COLLISION ENERGY (units: eV/AMU) C SCX = CX CROSS-SECTION (units: cm**2) C C Extrapolation criteria: C C Low E: zero gradient extrapolation (i.e. DY(1) = 0.0) C High E: zero curvature extrapolation (i.e. DDY(N) = 0.0) C C (These criteria are met by calling XXSPLE with IOPT=4) C C C ROUTINES: C ROUTINE SOURCE BRIEF DESCRIPTION C ------------------------------------------------------------ C XXSPLE ADAS SPLINE SUBROUTINE (EXTENDED DIAGNOSTICS) C R8FUN1 ADAS REAL*8 FUNCTION: ( X -> X ) C C AUTHOR: H. P. SUMMERS, UNIVERSITY OF STRATHCLYDE C JA8.08 C TEL. 0141-553-4196 C C DATE: 16/11/95 C C UNIX-IDL PORT: H.P.SUMMERS C C VERSION: 1.1 DATE: 30-04-96 C MODIFIED: WILLIAM OSBORN (TESSELLA SUPPORT SERVICES PLC) C - PUT UNDER SCCS CONTROL C C----------------------------------------------------------------------- C C----------------------------------------------------------------------- INTEGER IEA, IEVAL, NEDIM LOGICAL LERNG(IEVAL) REAL*8 EEVA(IEVAL), SCX(NEDIM), SCXA(IEVAL) REAL*8 TEEA(NEDIM)